BH GSO ASTM D7143:2022
Bahraini Standard
Current Edition
·
Approved on
28 April 2022
·
Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
BH GSO ASTM D7143:2022 Files
English
20 Pages
Current Edition
Reference Language
BH GSO ASTM D7143:2022 Scope
1.1 This practice is intended for determining volatile organic compound (VOC) emissions from materials and products
using emission cells. It can be applied in principle to most
construction materials and many products used indoors. Objectives include:
1.1.1 To provide manufacturers, builders, and end users
with emission data useful for evaluating the impact of building
products, new or old, on indoor air concentrations in a model
room.
1.1.2 To promote the development of products with lower
VOC emissions.
1.2 This practice is for identifying emitted VOCs and for
determining the area specific emission rate of VOCs from
newly produced building products under defined climate conditions. The method can also be applied to aged products.
1.3 In accordance with the definition of an emission cell, it
is also possible to perform nondestructive emission measurements on building products on-site in buildings. However, the
procedure for such measurements is not described in this
practice.
1.4 This practice describes the design, construction, performance evaluation and use of emission cells for VOC emission
testing. Sampling, transport and storage of materials to be
tested, and preparation of test specimens are also described.
1.5 Air sampling and analytical methods for the determination of VOCs are described in Practice D6196. Alternative
sampling and analytical approaches for formaldehyde and
other carbonyls are described in Test Method D5197.
NOTE 1—All volatile (vapor-phase) carbonyls except formaldehyde can
be analyzed by either Practice D6196 or by Test Method D5197.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
GSO 1421:2002
Gulf Technical Regulation
Hollow blocks made from clay for walls
Recently Published from Construction and Building Sector
GSO ISO 52120-1:2024
ISO 52120-1:2021
Gulf Standard
Energy performance of buildings — Contribution of building automation, controls and building management — Part 1: General framework and procedures
GSO ISO 52018-1:2024
ISO 52018-1:2017
Gulf Standard
Energy performance of buildings — Indicators for partial EPB requirements related to thermal energy balance and fabric features — Part 1: Overview of options
GSO EN 1097-7:2024
EN 1097-7:2022
Gulf Standard
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
GSO ASTM C114:2024
ASTM C114:23
Gulf Standard
Standard Test Methods for Chemical Analysis of Hydraulic Cement